WS2813 Dual data line WS2811 Built-in 5050 RGB LED Strip Individual Addressable 5V DC Nonwaterproof

Features and Benefits

The control circuit and the LED share the only power source.

The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.

Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place.

Built-in power-on reset and brown-out reset circuits.

The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz/s.

Serial cascade interface, data receiving and decoding depend on just one signal line.

Dual-signal wires version, signal break-point continuous transmission.

Any two point the distance more than 3m transmission signal without any increase circuit.

When the refresh rate is 30fps, cascade numbers are far more than 1024 points.

Data transmitting at speeds of up to 800Kbps.

Good color consistency reliability, high cost-effective.
Patameter:

Connection:
1) Signal wire: DC+, DAT,CLK, GND
2) DC+ and GND connect to power supplier; DAT,CLK and GND connect to controller
3) Relative Controller: SPI controller support ws2811; when use DMX decorder, can connect to DMX system
4) Support online control

Color:
1) Each pixel can be controlled individually
2) Can show any color
3) Can be used as flexible led display screen to show image and video

Installation Notice:
1) Make sure the connection is correct according to the diagram
2) Pay attention to the parameters limit of voltage. DO NOT run over the peak value
3) Keep the surface of installation clean and smooth avoid breaking off
4) Avoiding the crook area just the position of LED and other components, in order to protect the product and extend the life span of the product

Controller: DMX controller & decoder & SD controller & arduino controller

Change color individually and addressable full color

Shenzhen Normand Electronic Co., Ltd focuses on the development,producing,sales and service of LED Strip, 

LED Pixel Light, LED Module, LED Light Source and LED lighting products, who holds strong R&D 

and manufacturing capacity.high efficiency management and advanced manufacturing equipments.

In order to meet different needs which from decoration of entertainment place and advertisement board, 

we have been working in producing all kinds of  digital LED strip,like WS2813,SK9822,SK6812 ,SK6812 RGB, SK6812 WWA ,

 SK6812 3535 , SK6812 RGBW, SK6812 RGBY, SK6822 LED STRIP,APA102 APA104, WS2801 WS2811

 WS2812B, TM1809 TM1812,LPD6803,LPD8806, UCS1903 ,and side view 335,335rgb,S shape 2835 ,3528,

5050 normal led strip and so on. With the development of IC technology and growth of company power,

 much more models led strip light with new functions are designed to meet various needs. Color grade

 and changing patterns become more and more selectable. And some led strip light can accomplish

 LED display effects. 

Energy saving ,environmental protection, good electric property, excellent heat diffusivity ,good ability of anti-attenuation and reliable are the main characteristics of Normand LED products. 

Nowadays, Normand LED sells well in America, Europe and Asia market. In domestic market, Normand LED

already stands in its position and become the famous leading LED lighting company, Normand LED receive

great compliment by clients. 

We believe that credit is uppermost,quality comes first and pursues excellence to push developing and innovation,

we will make great contribution to Lighting industry and environmental programs.